How do I access my orcon router settings?

ORCON GENIUS WHITE [NF4V Netcomm] Once connected, open a web browser and type https://192.168.20.1 or https://192.168.1.1 into the URL bar to access the modem’s interface. When prompted, login to the router – Please use “admin” for username and “admin” or the last 6 characters of the MAC address for password.

How do I change my WiFi name orcon?

Navigate to ‘Network’ in the left-hand side. Select ‘Wireless (2.4 GHz)’ on the left-hand side. Type the desired wifi username under SSID Name.

Can a modem be configured?

Configuring a modem can seem complicated, and often it can be quite difficult to tell what step you’re up to, or what you need to do next. But as long as you’ve got the capable equipment, and the right instructions from your internet service provider (ISP), everything should be breezy.

How do I adjust settings on my router?

Change Wireless Router Settings

Connect to your network wirelessly, or via ethernet.
Find your router configuration page.
Log in with the username and password.
Find the Wireless Settings page.
Set the new channel, usually with a dropdown menu.
Your router will now reboot.

How do you set up orcon fiber?

Wireless Setup Method

Login to your My Orcon.
Once you are logged in, select ‘My WiFi’ from the top.
Enter your desired Wi-Fi network name in the ‘Wireless Network Name’ field and password in the ‘Wireless Network Password’ section.
Click ‘Save Changes’ and you will receive confirmation of the changes you have made.

How do I change my modems password?

How to Change Your WiFi Name and Password

Open a web browser.
Then type your router’s IP address into the search bar and press the Enter key.
Next, enter your router’s username and password and click Sign In.
Then click Wireless.
Next, change your new WiFi name and/or password.
Finally, click Apply or Save.

How do you bypass a password on a modem?

What can I do if I forget the login username/password of my DSL modem/router?

Step 1 Turn off the router.
Step 2 Press and hold the reset button on the rear panel with a pin, then turn on the router.
Step 3 Release the reset button and wait for the device to reboot.
Note:

How can I reset the password of a modem?

All you have to do is press and hold the reset button on the back of your modem for 7 seconds. Once you release the button the modem will reboot with its factory settings. After the modem reboots, you can log into the modem with its default password and manually change it to a new one that is more secure.

How do I set up my Orcon fibre connection?

If you have homeline services with Orcon, plug your telephone handset into the “FON 1” port of your modem. 4. The physical set up of your Orcon Fibre connection is now complete and we will need to wait 5 minutes to allow your modem to download its configuration settings.

How do I connect a storage device to my Orcon modem?

Your Orcon-supplied modem may have a USB port. This can be used to share files on the local network (LAN) and access them from mobile and desktop devices within your home. The USB port only supports external hard-drives and USB flash drives. It cannot not provide Internet connection between your PC and the modem. To connect a storage device: 1.

What is the MAC address on my Orcon modem?

A Media Access Control (MAC) address is a unique address for networked devices, based on the hardware of the device. You’ll find the MAC address on the base of your Orcon NF4V/NF18 modem. The last 6 digits of this MAC address are the password to login to your modem’s interface (all lower-case).

How do I connect my modem to my fibre ont?

Connect one end of your yellow Ethernet cable to the “LAN 1” port of your modem and the other end to the “LAN1/GE1” socket of your Fibre ONT (white Fibre box, usually mounted on your wall). Ensure your ONT is connected to the power and turned on. 2. Plug the power supply into a power socket and the other end into the power point of your modem.