How do I fix the paper jam on my HP LaserJet Pro MFP?

How do I fix the paper jam on my HP LaserJet Pro MFP?

Clear jammed paper from the input tray

  1. Open the toner cartridge access door.
  2. Remove the toner cartridge.
  3. Remove any paper from the input tray.
  4. Use both hands to remove any jammed paper from the input tray.
  5. Install the toner cartridge, close the toner cartridge access door, and then load plain paper in the input tray.

How do you unjam a LaserJet Pro MFP m426fdn?

HP LaserJet Pro MFP M426, M427 – Clear paper jams in the output…

  1. If paper is visible in the output bin, grasp the leading edge and remove it.
  2. Lift the scanner assembly.
  3. Remove any jammed paper.
  4. Close the scanner assembly.
  5. Open the rear door.
  6. Remove any jammed paper from the rear door area.
  7. Close the rear door.

How do I Unjam my HP LaserJet Pro m404dn?

Clear paper jams in the fuser

  1. Press the front-door-release button. Figure : Open the front door.
  2. Open the front door. Figure : Open the front door.
  3. Remove the toner cartridge. Figure : Remove the toner cartridge.
  4. Lift the jam-access cover.
  5. Remove any jammed paper.
  6. Install the toner cartridge.
  7. Close the front door.

How do you fix a rear paper jam?

Paper Jam Problems in the Rear Cover

  1. Cancel the print job, if necessary.
  2. Remove the rear cover from your product. Carefully remove any jammed paper from inside the product.
  3. Remove any jammed paper from inside the rear cover.
  4. Reattach the rear cover.
  5. Follow the prompts on the LCD screen to clear any error messages.

How do you clear a paper jam on a HP LaserJet cp2025?

Clear jams in tray 2

  1. Pull out tray 2 and place it on a flat surface. Figure : Pull out tray 2.
  2. Lower the jam-access tray. Figure : Lower the jam-access tray.
  3. Remove the jammed sheet by pulling it straight out. Figure : Pull the jammed sheet from tray 2.
  4. Replace tray 2.
  5. Press OK to continue printing.

How do I fix my media jam?

Pull the media to the cutter groove and cut off the torn or creased media from the roll. Manually rewind the media. Remove any media that remains inside the product. Turn the product back on, load media, run a nozzle check and, if necessary, clean the print heads.

How do you fix a jam in a cartridge?

Follow these steps to resolve the issue.

  1. Lift the scanner assembly.
  2. With the printer turned on, disconnect the power cord from the rear of the printer, and then open the top cover.
  3. Remove the toner cartridge.
  4. Remove any jammed paper from the cartridge area.
  5. Reinsert the toner cartridge.
  6. Close the top cover.

How do you remove paper jam from HP Laserjet Pro MFP m130a?

Remove any jammed paper that is accessible from the toner cartridge area.

  1. Turn off the printer.
  2. Use both hands to remove any visible jammed paper in the ADF input tray.
  3. Open the ADF cover.
  4. Use both hands to remove any jammed paper inside the ADF.
  5. Close the ADF cover.
  6. Turn on the printer.
  7. Try to print again.