How do I reset my ATA 186?

ByEditor

How do I reset my ATA 186?

Resolution/Steps

  1. Using an analog phone with full keypad (Unhooked) plugged into the “Phone 1” port. Press the function button on the top of the ATA. “Phone 1” Port. Function button:
  2. Enter the following: 322873738#*​
  3. Enter * to save.
  4. Hang Up.

How does Cisco ATA work?

Your analog telephone adapter (ATA) allows you to connect an analog device, such as an analog phone or fax machine, to your network. The connected device can then function like the IP phones in your network. Light-emitting diodes (LEDs) on the ATA provide status.

How do you restart an ATA?

To restart the ATA, use a paper clip or similar object to press this button briefly. To restore the factory default settings, press and hold for about 10 seconds. The LED behaviour for the factory reset: After you press and hold the button for about 10 seconds, the Power LED is fast flashing green.

How do you reset ATA 187?

Dial the following IVR code using the phone keypad: 73738 (RESET) followed by the # key. The IVR will ask you to confirm by pressing the 1 on the phone keypad. You must hang-up the phone to commence the reboot sequence.

How do I set up my ATA adapter?

Connect the ATA power cable to the DC 5V POWER port on the ATA, and plug the power cable into your power source….Before you begin

  1. Ethernet cable to connect to your network.
  2. Analog phone or fax machine to connect to your ATA.
  3. Phone cable to connect your phone.
  4. Uninterruptible power supply (UPS) to provide backup power.

How do I find my Cisco ATA IP address?

At the voice prompt menu, enter 110 #. The phone will read back the IP address of the base, which can be entered into a browser to access the configuration. At the voice prompt menu, enter 210 #. The phone will read back the IP address of the base, which can be entered into a browser to access the configuration.

How do I reset my Cisco ATA 190?

Where can I download the latest Cisco ATA 186 software release?

This executable file is included in the latest Cisco ATA 186 software release zip file located at the Cisco ATA186 Analog Telephone Adaptor Software Download section of Cisco.com. You can upgrade the software image of your Cisco ATA 186 remotely.

What is ATA 186 used for?

Introduction The Cisco Analog Telephone Adaptor (ATA) 186 is a handset-to-Ethernet adaptor that interfaces regular analog phones with IP-based telephony networks. The Cisco ATA 186 has two voice ports that were designed to support legacy analog touch-tone telephones.

What are the voice ports on the Cisco ATA 186?

The Cisco ATA 186 has two voice ports that were designed to support legacy analog touch-tone telephones. Unlike the regular Foreign Exchange Station (FXS) ports, these cannot be interfaced with a PBX as the Cisco ATA 186 cannot send out digits on these ports.

How do I verify the IP address used by Ata 186?

Verify the IP address used by the internal web server on the Cisco ATA 186 through the IVR. In order to do this, select menu number 80#. From the PC, open a Web browser and enter this URL: http:// /dev.

How does a Cisco ATA work?

How do I reset my ATA 191?

ATA 191 and ATA 192 Top Panel

  1. System detects a factory reset. To perform a factory reset, press and hold the RESET button for about 10 seconds.
  2. A factory reset is performed successfully.

How do I reset my analog phone?

Dial “* * *” (press the star key thrice) for the voice prompt. Enter “99” and wait for the “reset” voice prompt. Now enter the encoded MAC address (see below on how to encode the MAC address). Wait 15 seconds and device will automatically reboot and restore factory settings.

How do I access ATA?

In the ATA Center server, click the Microsoft ATA Console icon on the desktop or open a browser and browse to the ATA Console. You can also open a browser from either the ATA Center or the ATA Gateway and browse to the IP address you configured in the ATA Center installation for the ATA Console.

How do I configure ATA 192?

Connect the network cable to your network and to the NETWORK port on the ATA….Install Your New ATA 191 and 192

  1. Ethernet cable to connect to your network.
  2. Analog phone or fax machine to connect to your ATA.
  3. Phone cable to connect your phone.
  4. Uninterruptible power supply (UPS) to provide backup power.

How do I access ATA 192?

Cisco ATA 191 and ATA 192

  1. Plug the ATA into your local network from the Network port.
  2. Plug a computer into the ethernet port of the ATA 192.
  3. Navigate to 192.168. 15.1 (By default this device is routing and has DHCP on for connections with the Ethernet port.
  4. Log in using admin/admin.