How do I set up AnyConnect on ASA?

ByEditor

How do I set up AnyConnect on ASA?

There are eight basic steps in setting up remote access for users with the Cisco ASA.

  1. Configure an Identity Certificate.
  2. Upload the SSL VPN Client Image to the ASA.
  3. Enable AnyConnect VPN Access.
  4. Create a Group Policy.
  5. Configure Access List Bypass.
  6. Create a Connection Profile and Tunnel Group.
  7. Configure NAT Exemption.

How do I check my Cisco AnyConnect license on ASA CLI?

Some time you may need to check how many AnyConnect VPN license do you have in Cisco ASA via ASDM, please log into ASDM -> Configuration -> Licensing -> Activation Key.

How do I enable local LAN access in VPN software?

Right click the Cisco AnyConnect client. Left click on Open AnyConnect. Select Advanced Windows. From the Preferences tab, ensure the Allow local (LAN) access when using VPN (if configured), is check.

How do I connect to Cisco VPN client?

Connect

  1. Open the Cisco AnyConnect app.
  2. Select the connection you added, then turn on or enable the VPN.
  3. Select a Group drop-down and choose the VPN option that best suits your needs.
  4. Enter your Andrew userID and password.
  5. Tap Connect.

How do I find the IP address of my Cisco AnyConnect?

From Status Menu

  1. If the Cisco AnyConnect Client is showing in the status menu, click on its icon.
  2. In the drop down selector from the status menu, click on Show Statistics Window.
  3. The IP Address is located in the line that says “Client Address (IPv4).”

How is Cisco VPN configured?

Steps for setting up a VPN

  1. Step 1: Line up key VPN components.
  2. Step 2: Prep devices.
  3. Step 3: Download and install VPN clients.
  4. Step 4: Find a setup tutorial.
  5. Step 5: Log in to the VPN.
  6. Step 6: Choose VPN protocols.
  7. Step 7: Troubleshoot.
  8. Step 8: Fine-tune the connection.

What version of IPsec VPN is used on a Cisco ASA?

This is a configuration example of an IPsec VPN on a Cisco ASA. This example uses ASA version 9.12 (3)12. We’ll be using the following information in the configuration:

How to configure Cisco AnyConnect VPN client for ASA?

HL, Open the “Cisco Anyconnect VPN Client” software (it must be installed on your PC after connecting for the first time on the ASA) and click on “Preferences” button (it is next to “Connect to: IP address”). Then click on “Enable Local LAN Access“.

How to access ASA from inside interface of VPN?

You should enable ssh or asdm to allow access from the IP pool which is assigned to the VPN users. Then you can access the ASA on the inside interface. Stevesays

Is there a VPN service available at ETH?

The VPN service of ETH is provided by ITS. There are two main advantages of using the VPN service when not at the campus: All communication between the end device and the ETH network is encrypted.