How do you set up a Userman?

How do you set up a Userman?

User Manager RADIUS Server Basic Configuration

  1. Put admin in Login input box and hit Log in button. User Manager Web Interface will appear.
  2. Click on Customers menu item and you will find that admin customer is available here.
  3. Click on admin customer.
  4. Now put a strong password in Password input box and click Save button.

How does HotSpot work in MikroTik?

The MikroTik HotSpot gateway provides authentication for clients before access to public networks. A HotSpot only works reliably when the IPv4 protocol is used; the HotSpot relies on Firewall NAT rules which aren’t supported with IPv6.

How do I create a HotSpot with Radius server authentication?

Radius Client Configuration in MikroTik RouterOS

  1. Click on Radius menu item from left menu bar.
  2. Click on PLUS SIGN (+).
  3. Click on hotspot checkbox from Service panel.
  4. Put Radius Server IP address (in this article: 192.168.
  5. Provide a password in Shared Secret input field.
  6. Click Apply and OK button.

What is Userman MikroTik?

Introduction. User manager (UM) is a management system that can be used in various setups. UM can be used for HotSpot, PPP, DHCP, Wireless and RouterOS users. User Manager is a RADIUS server application. User manager package is supported on all RouterOS architectures including x86 and Cloud Host Router.

How do you make a captive portal for mobile hotspot?

Configure Captive Portal Settings

  1. Open Manage.
  2. Select Configuration > Device Configuration > SSID Profiles.
  3. Select an existing SSID profile or create a new profile.
  4. Expand the Captive Portal section.
  5. Select the Enable Captive Portal check box to display a portal page to be shown to clients on the guest network.

What is the default username and password for MikroTik?

Every router is factory pre-configured with the IP address 192.168. 88.1/24 on the ether1 port. The default username is admin with no password.

How can I get MikroTik password?

Mikrotik Password Recovery How

  1. First of all you have to visit the Mikrotik Password Recovery Tool site by MRT.
  2. Select Choose File, your Mikrotik Backup File.
  3. Click submit, this tool will read the Mikrotik username and password from the backup file.
  4. Then you will see a list of Mikrotik users and passwords.
  5. Done.

How do I set up a MikroTik wireless hotspot?

Enter a name for your administrative Hotspot user. Enter a password for your administrative user. Click “OK” to complete your hotspot setup. Congratulations, you have now set up basic functionality for a Mikrotik Wireless Hotspot, you can create users under “IP->Hotspot->Users.

How to connect to MikroTik router via FTP?

If you wish to use FTP you can FTP to your mikrotik router with the admin userid and password and replace the file there under the ‘hotspot’ directory. 11. You have to set the Login/Logout URL IP addresses in the Control Center.

How to configure MikroTik splash page settings?

In Splash Page Settings modify the Internal Login/Logout URL Set to Mikrotik. Make sure that ‘Display Login Box on Main Splash Page’ option is CHECKED. 12. Extend the shared-users limit in your hotspot profile. Change shared-users to 5. 13. As the last step you have to add hourly checking for up status for the Router Alert feature.

How do I set up a hotspot?

Change the SSID to “Hotspot”, or whatever suits you. Click on the “IP” menu. If this option is not available refer to step 2 Click on “Hotspot Setup”. This will start the Hotspot Setup Wizard