What does OL mean on a fluke?

ByEditor

What does OL mean on a fluke?

Infinite resistance
Infinite resistance (open circuit) is read as “OL” on the Fluke meter display, and means the resistance is greater than the meter can measure. Resistance measurements must be made with the circuit power off – otherwise, the meter or circuit could be damaged.

What does OL mean on voltmeter?

If you’re ohming something and it reads “OL” then your loop is open, in other words the path is not continuous (broken/separated) If you’re in the voltage setting and it reads “OL” then the voltage you’re measuring is too high for your meter to read.

What does OL mean on a capacitor?

Wait for the result. An “OL” or “overload” reading means the capacitance is too high for the multimeter to measure. Set the multimeter to a higher range if possible. This result can also mean the capacitor has shorted. An auto-ranging multimeter will test the lowest range first, then increase if it hits an overload.

What does OL stand for?

Acronym Definition
OL Ordered List (HTML)
OL Overlap
OL Office Lady (English term used in everyday Japanese for working unmarried young lady)
OL On-Line

What is OL in electrical?

If the screen displays 1 or OL (open loop), there’s no continuity—that is, there’s no path for electric current to flow from one probe to the other. A diode is like a one-way valve for electricity, meaning it will show continuity in one direction, but not in the other.

Does Ol mean short circuit?

If your multimeter shows infinite ohms or OL, then that means the breaker could have deteriorated and tripped from a lower current flow. If the multimeter shows continuity, there is a short circuit. It could be caused by a faulty breaker, broken wire, or a faulty receptacle or switch.

What is OL computer?

These tags are used to create lists. A list must start with either a

    if it is an unordered list (with bullets) or start with a

      if it is an ordered list (with numbers).

Is Ol a short circuit?

What is ol used for?

The ol element is used to define an ordered list. This is a list where each list item is preceded by a numerical or alphabetical identifier (as opposed to an unordered list, ul , which has list items preceded by bullet points). It’s good practice to use ol where the steps in the list must be carried out in sequence.

What is OL code?

The

    tag defines an ordered list. An ordered list can be numerical or alphabetical. The

  1. tag is used to define each list item.