What does P1 on my dehumidifier mean?

What does P1 on my dehumidifier mean?

auto defrost mode
P1 is auto defrost mode. It’s normal for the coils in dehumidifiers to frost. When this happens, the unit will go into auto defrost mode. Once the unit has finished defrosting it will go back to the programmed settings.

What does E3 mean on dehumidifier?

humidity sensor
Haier – Dehumidifier Displaying an Error Code

Code Description/Reason Solution
E3 Indicates a problem with the humidity sensor Requires service

Why does my dehumidifier says P2?

P2 or Eb means that the bucket is full or that the bucket has been removed. Remove the bucket from the unit. Check that the float and foam have not been removed from the bucket and that the float isn’t broken.

What does P2 mean on a dehumidifier?

Bucket is full
P2 – Bucket is full. Empty the water bucket and reinstall it. How do I drain my dehumidifier? Again, different models may display different codes.

What does P2 mean on dehumidifier?

How do you fix P2?

Steps to Troubleshoot and Fix a P2 code

  1. The first thing to check is for anything blocking the outside and inside ventilation.
  2. Reset the unit by shutting the power off and unplugging the unit for 10 minutes.
  3. Check the temperature at the top of the compressor.
  4. Check for a refrigerant leak.
  5. Check for low refrigerant.

What are P2 codes?

The P2 or FL error code is an indication that the drain pan in the unit is full. Under normal operating conditions, the drain pan will not need to be drained. The drain pan is small and holds less than 8 ounces of water.

How do I fix E3 error on dehumidifier?

If E3 appears, please the check the ambient temperature range whether below 89.6°F (32°C). If the ambient temperature over 89.6°F (32°C) place the unit below 86°F (30°C) for 2 hours before running the Dehumidifier again.

What do the error codes on my dehumidifier mean?

Please refer to your user manual for error codes and operating instructions for your specific model. Common dehumidifier error codes and messages can be found in the list below: ES or E1 – Temperature sensor error. E2 – Defrost sensor error. AS or E3 – Humidity sensor error. P1 – Unit is in defrost mode.

How many pints of humidity does a keystone dehumidifier remove?

The Keystone KSTAD70A 70-pint Dehumidifier removes up to 70 pints of humidity from the air per day. What does Code P2 mean? What does Code P2 mean?

What does P2 mean on mdf1-30ae bucket?

• Answered on Oct 18, 2013 • 612 views I could not find the user manual for your particular model but the manual for the MDF1-30AE model indicates that the P2 code is when the bucket is full or not in the right position.

What should I do if my dehumidifier is malfunctioning?

Unit malfunction. Dehumidifiers are designed to function within specific temperate ranges, usually between 50 and 80 degrees. Make sure that the ambient temperature of the room is within the range of your dehumidifier. Try not to run it continuously. 5/30/2016 12:27:10 PM • Midea Westpointe… • Answered on May 30, 2016 • 3,229 views