What is clevis pin diameter?
What is clevis pin diameter?
The length of a clevis pin is measured from under the head to the end of the pin. The effective grip length should be measured from under the head to the top of the hole. Brainard Rivet manufactures clevis pins from 3/16″ (4.8 mm) through 5/8″ (15.9 mm) in diameter.
Is standard for clevis pin?
Metric Clevis Pin Dimensions according to ISO 2341 and ISO 2340 standards….Metric Clevis Pin Dimensions:
| INPUT PARAMETERS | |
|---|---|
| Nominal Pin Size | 3 4 5 6 8 10 12 14 16 18 20 22 24 27 30 33 36 40 45 50 55 60 70 80 90 100 |
| Pin Length * | 6 8 10 12 14 16 18 20 22 24 26 28 30 |
| Clevis Pin Type | with head w/o head |
What is the difference between a cotter pin and a clevis pin?
Clevis Pin Unthreaded Clevis Pins have a domed head at one end and a cross-hole at the other end. A Cotter Pin is used to keep the Clevis Pin in place. Threaded Clevis Pins are partially threaded on one end with a formed head on the other.
What is a clevis pin used for?
Clevis pins are used as a quick and secure fastener in place of bolts and rivets. Designed with both a flat or domed head on one end and cross-hole at the other, a clevis pin is inserted through the holes at the pronged ends of a clevis and is kept in place by a cotter pin.
What sizes do clevis pins come in?
| Clevis Pin Dimensions 1 | ||
|---|---|---|
| Pin Size | Hole Size2 | Recommended Size |
| 1/2 | 5/32 | 7/16 ~ 3/4 x 0.125 x 2 9/16 |
| 9/16 | 5/32 | 7/16 ~ 3/4 x 0.125 x 2 9/16 |
| 5/8 | 5/32 | 7/16 ~ 3/4 x 0.125 x 2 9/16 |
What is the nominal diameter of the shank of the clevis pin?
12mm
12mm Shank Diameter Clevis Pins with Holes – Build Your Own Custom – Pivot Point.
How are cotter pins sizes?
American standard cotter pin sizes are in nominal fractional inches, starting at 1/32. The sizes below 5/16 inch are intended to fit a hole 1/64 inch larger than the pin size; for pins larger than that the pin and hole size are the same.
What do clevis pins look like?
The clevis is a U-shaped piece that has holes at the end of the prongs to accept the clevis pin. The clevis pin is similar to a bolt, but is either partially threaded or unthreaded with a cross-hole for a split pin.
How are clevis pins measured?
Clevis Pins are measured by Diameter and Grip Length, a given Diameter is available in a variety of Grip lengths. Grip Length is the length between the underside of the Head and an installed Cotter Pin.
What is the nominal Diameter of the shank of the clevis pin?
What is the function of a clevis pin?
Clevis Pins. Clevis Pins are a type of fastener that will allow the rotation or swivel of the connected parts about the axis of the pin linkage. A clevis pin, sometimes referred to as a link pin or hinge pin, consists of a head, shank and cross drilled hole. When using a fastening, such as a clevis pin, the hole which is at the opposite end of
How to pronounce clevis pin?
clevis pin noun. A type of fastener that allows rotation of the connected parts about the axis of the pin. A clevis pin consists of a head, shank and hole. The hole passes through the shank at the opposite end of the pin from the head. A cotter pin through the hole keeps the clevis pin in place.
What does clevis pin mean?
How to measure a clevis shackle?
From the center,draw a line in the direction of 70° (the boom is set at 20° above the horizontal).