What is lashing wire used for?

Lashing wire is stainless steel wire commonly used in the utility and telecommunications industries to bring and support aerial cables or a combination of cables to a supporting strand.

What is lashing in telecom?

Systems that use support wires require another external wire to secure the messenger wire to the fiber optic cable. The telecom industry uses stainless steel lashing wire to secure or lash the messenger wire and fiber optic cable together.

How do you lash wire?

Start with a Clove Hitch around one pole. Twist short end around long and wrap the rope around both poles, alternately going over and under each pole about three or four turns. Tighten the lashing by surrounding it with three or four frapping turns. Finish with two or three tight half hitches.

What is messenger cable?

Definition of messenger cable : a usually steel cable supporting a telephone cable or other wires conducting electricity.

What is aerial Overlash?

Overlashing is the process of physically tying additional cables to the cables that are already attached to a utility pole. This practice could accommodate any additional strands of fiber or coaxial cable on existing pole attachments.

What is aerial fiber optic cable?

Aerial fiber optic cable is a type of fiber optic cables that is usually used for outside installation on poles. Aerial cables are mainly used for secondary trunk level and below and usually applied to flat terrain or low fluctuation area.

What is aerial cable called?

Coaxial Cable
Coaxial cable, also known as TV aerial cable or coax, is primarily used to carry video and data signals from an aerial to a device such as a satellite dishes or television. This is due to the well insulated conductor wire which prevents frequency interference.

What is aerial cable installation?

Aerial Cable Installation. Deploying fiber above ground on poles or towers removes the need for underground digging and is particularly useful when the ground is uneven, rocky or both. Aerial installation is generally much less costly than underground construction also.

What type of lashing wire is used in the telecom industry?

The telecom industry uses stainless steel lashing wire to secure or lash the messenger wire and fiber optic cable together. Each selection of lashing wire meets ASTM A580 specifications.

What is s43000 lashing wire?

Type 430 (S43000) lashing wire is a low-carbon stainless steel wire with 17% chromium. Though certain conditions can cause dark surface staining, this alloy’s characteristics make it ideal for applications that fall under general use. Its tensile strength ranges from 70k to 95k psi, and it has an average break load of 125 pounds.

What is the difference between 302 and 430 lashing wire?

Type 302 lashing wire comes in two diameters — 0.045 inches and 0.038 inches. Type 430 (S43000) lashing wire is a low-carbon stainless steel wire with 17% chromium. Though certain conditions can cause dark surface staining, this alloy’s characteristics make it ideal for applications that fall under general use.

What type of wire is used for aerial cables?

Other wires, like messenger wire, support data-transmitting aerial cables. Systems that use support wires require another external wire to secure the messenger wire to the fiber optic cable. The telecom industry uses stainless steel lashing wire to secure or lash the messenger wire and fiber optic cable together.