What is Mitsubishi brake Assist?

What is Mitsubishi brake Assist?

EMERGENCY BRAKE ASSIST SYSTEM (EBA) – This system can assist by automatically increasing brake pressure under emergency braking conditions to maximise potential braking force. The “Sudden Stop” Effect you feel after braking immediately is the epitome of EBA!

How do you turn off the FCM on a Mitsubishi Outlander?

FCM is switched on by default at the start of each journey. However, the system can be switched off by the driver by means of a dashboard mounted button.

What does FCM mean on Mitsubishi Outlander?

Forward Collision Mitigation (FCM) With Pedestrian Detection 3. If Outlander detects a car or pedestrian in front of the vehicle through the front radar and camera, a warning appears. If brakes are still not applied and the risk of collision is imminent, Forward Collision Mitigation applies the brakes.

Does Mitsubishi Outlander have emergency brake?

Rear Automatic Emergency Braking (Rear AEB) Sonar sensors near Outlander’s rear bumper can detect objects behind the vehicle. If something is too close, Rear Automatic Emergency Braking issues an audible warning and attempts to stop the vehicle, reducing the chance of an accident.

What is the purpose of a Brake Assist system?

When panic braking is detected, the Brake Assist system automatically develops maximum brake boost in order to mitigate a driver’s tendency to brake without enough force. In doing so, Brake Assist has been shown to reduce stopping distance by a significant margin (up to 20% in some studies).

How does Brake Assist system work?

The Feature: Brake Assist is designed to help drivers apply full emergency stopping power in a panic-stop situation. If Brake Assist detects an extreme rate of pedal application and pressure as the result of a sudden stop, the system applies full braking force to help stop the vehicle in the shortest distance possible.

What is FCM ECU?

The Defect According to the NHTSA Safety Recall Report, due to incorrect software, the FCM-ECU (Electronic Control Unit) may apply braking for longer than needed. The error may occur when a pedestrian was registered as being in front of the vehicle, even after a pedestrian is no longer detected.

What is FCM service required?

FCM Service Required. The Mitsubishi Outlander FCM Service Required warning light indicated a fault in the Forward Collision Mitigation System (FCM). This may be due to an overheated sensor. The sensor is located in front of the rear-view mirror inside the car.

What is P sonar in Mitsubishi?

Features. Using an ultrasonic sensor mounted inside of the bumper in the front and rear of a vehicle, judges the distance and position information of obstacles around a vehicle, and gives the user a warning. Also, this sensor is used for collision avoidance, collision damage reducing and autonomous parking systems.

What is lane change assist Mitsubishi?

The Lane Change Assist system sounds an audible alert and displays a blinking warning in the door mirrors when the system detects a high collision probability with a vehicle coming from behind moving in the same direction within 3.4m from your vehicle’s side or rear bumper.