# What size is a 6mm nut?

## What size is a 6mm nut?

Product details
Diameter: 6mm
Width across the flats: 10mm
Width across the flats Min: 9.78mm

What are the flats on a bolt?

Width across flats is the distance between two parallel surfaces on the head of a screw or bolt, or a nut, mostly for torque transmission by positive locking.

What is the height of a hex nut?

Hex nut size refers to its nominal thread diameter. Typically, sizes range from 1/4″ to about 2 1/2″. Size is specified in inches, usually fractional rather than decimal.

### How do you measure the width of a nut?

Stretch the tape measure across the nut’s diameter to the flat-side directly across from the one your pulling from. If the nut is metric, count the number of lines on the tape measure to find the measurement. If you count 9 lines, the size is a 9-mm (millimeter) nut.

How wide is m16?

Metric Hex Bolt Dimensions

NOMINAL SIZE (D) BODY DIAMETER ACROSS CORNERS
m16 16.00 27.71
m20 20.00 34.64
m24 24.00 41.57
m30 30.00 53.12

How wide is an M8 bolt?

Dimensions for DIN931 Hex Head Bolt

Diameter (d) Pitch Across Flats (s)
M8 1.25mm 13mm
M10 1.5mm 17mm
M12 1.75mm 19mm
M14 2mm 22mm

#### What size head does a M6 bolt have?

SOCKET HEAD CAP SCREW – METRIC

M4-0.7 4.00 7.00
M5-0.8 5.00 8.50
M6-1.0 6.00 10.00
M8-1.25 8.00 13.00

What size socket fits an M6 bolt?

10mm
Size Chart

Bolt size Size Tolerance
M6 10mm 10.04
M7 11mm 11.04
1/4″UNF 7/16″ 11.15
3/16″BSW 11.34

How are flats measured?

1. Put the flat shoe on a flat surface. Place the end of the tape measure perpendicular to the edge of heel and measure until it reaches the top edge of shoe. â€»Measurement including shoe sole.

## What is the size of a M6 nut?

M6 Nut Dimensions: Pitch: 1.00 mm, s max: 10.00 mm, s min: 9.78 mm, e min: 11.05 mm, m max: 5.2 mm, m min: 4.9 mm M8 Nut Dimensions: Pitch: 1.25 mm, s max: 13.00 mm, s min: 12.73 mm, e min: 14.38 mm, m max: 6.8 mm, m min: 6.44 mm

What is the maximum width of a flat nut?

Width Across Flats. Maximum width across flats shall not be exceeded (see excep- tion in General Data). No transverse action through the nut between 25% and 75% of the actual nut thickness as measured from the bearing surface shall be less than the minimum width across flats.

What is the difference between M16 and M20?

M16 Nut Dimensions: Pitch: 2.0 mm, s max: 24.00 mm, s min: 23.67 mm, e min: 26.75 mm, m max: 14.8 mm, m min: 14.1 mm M20 Nut Dimensions: Pitch: 2.5 mm s max: 30.00 mm, s min: 29.16 mm, e min: 32.95 mm, m max: 18.0 mm, m min: 16.9 mm

### What is the size of a m3 nut?

METRIC NUT DIMENSIONS CHART. Metric nut dimensions sizes chart according to ISO 4032. M3 Nut Dimensions: Pitch: 0.5 mm, s max: 5.50 mm, s min: 5.32 mm, e min: 6.01 mm, m max: 2.40 mm, m min: 2.15 mm. M4 Nut Dimensions: Pitch: 0.70 mm, s max: 7.00 mm, s min: 6.78 mm, e min: 7.66 mm, m max: 3.2 mm, m min: 2.9 mm. M5 Nut Dimensions: