Do oil boilers have a condensate pipe?

Modern oil condensing boilers require a discharge pipe to remove vapours that condense in the flue and run back down in to boiler. The pipe will discharge to a main drain or, if a drain not nearby, a ‘soakaway’, which is a shingle drain dug into the ground.

Do you need a certificate for an oil boiler?

Does an Engineer Need to be OFTEC Registered to Service Boilers? No – it is not a legal requirement for engineers to obtain OFTEC qualifications before installing an oil fired boiler. However, using an OFTEC engineer is recommended for enhanced safety and quality.

What does a boiler condensate pipe look like?

Look under the boiler to see if there is a plastic pipe – It’s usually white and around 20mm (about ¾”) wide. The pipe should run to the outside of your home and should always run into a drain. The condensate pipe is the diagonal pipe running along the side of the house.

Are all new oil boilers condensing?

Do all new boilers have to be condensing? Because of the building regulations now in place, the vast majority of new gas and oil boilers have to be condensing models. However, there are occasional exceptions to this rule. In rare cases, a condensing boiler may not be a viable option in a particular property.

How long should an oil fired boiler last?

between 10 and 15 years
The average life expectancy for a boiler is between 10 and 15 years. You should ensure that your boiler is maintained properly in order to keep it functioning for as long as possible.

How often should a oil boiler be serviced by law?

every twelve months
The recommended frequency of commercial boiler servicing is annually. Commercial boilers are especially susceptible to wear and tear, given their heavy-duty use. Furthermore, most insurance companies require boilers to be serviced every twelve months in order to maintain warranty validity.

How often should an oil boiler be serviced in a rented property?

Under the 1985 Landlord and Tenant Act, landlords have a legal responsibility to ensure the safe supply of sanitation, water, gas and electricity. Therefore, it’s the landlord’s responsibility to stay on top of oil fired boiler maintenance by having the boiler serviced annually.

What is the part number for an oil fired steam boiler?

OIL-FIRED NATURAL DRAFT STEAM BOILER — SERIES 3 — Boiler Manual SERVICE TECHNICIAN ONLY — read and follow completely. Connect oil piping Part number 550-141-829/031631 GOLD SGO OIL-FIRED NATURAL DRAFT STEAM BOILER — SERIES 3 — Boiler Manual SERVICE TECHNICIAN ONLY — read and follow completely. Fill the system 1.

What is the purpose of the boiler piping configuration?

This piping configuration was mandated by code for a long time to prevent low water conditions causing the boiler to dry fire. With the invention of more advanced low water protection devices, that piping configuration is no longer required by code everywhere, but it is still a good idea.

What size pipe do I need for a boiler circulator?

Boiler circulator(s) operate continuously. The minimum pipe size for connecting to a water storage tank is 1 ½”. The minimum pipe size for connecting the boiler is 1 ½” for the Mod Con 300 VWH and 2” for the 500 and 850 models.

What do I need to know about boiler manual?

Boiler Manual • Installation • Maintenance • Startup • Parts This manual must only be used by a qualified heating installer/service technician. BEFORE installing, read all instructions in this manual and all other information shipped with the boiler. Perform steps in the order given.