How do I fix my Lexmark printhead error?

How do I fix my Lexmark printhead error?

Go to “Replace Printhead” in the menu on the printer….For all other models:

  1. Press Wrench (setup/tool) button.
  2. Scroll to “Maintenance Menu”.
  3. Check “OK”
  4. Scroll to “Replace Printhead”.
  5. Check “OK”

How do you remove a Lexmark printhead?

How to remove the Printhead on Lexmark printer

  1. Step 1- Ensure that the printer is ON- You should ensure that the printer is on.
  2. Step 2- Chose options- For replacement of the printhead you should press the options in the below order : – Setup button- Maintenance- Replace Printhead.

How do I replace my Lexmark printer cartridge?

Replacing the toner cartridge

  1. Lift the front cover, and then pull down the multipurpose feeder door.
  2. Pull the cartridge out of the printer using the handle.
  3. Unpack the new toner cartridge, then remove the packing material, and then shake the cartridge to redistribute the toner.

Why is my Lexmark printer having printhead error messages?

If you are having print quality issues or are experiencing printhead error messages, you may have been impacted from a printhead problem affecting a limited number of Lexmark devices. IMPORTANT! The following steps require you to download a file to your computer or upload firmware to your printer.

How to fix Lexmark printer error 200?

To get rid of error 200, you need to remove any paper stuck in the printer by following these easy steps: Open the upper front cover of your Lexmark printer and remove the toner cartridge. Now carefully remove the paper from the inside of the printer. Then reinstall the toner and close the front cover.

How do I remove the exit flag from my Lexmark printer?

Turn off your Lexmark printer. Then remove the cover above the rollers on the tallest part of the printer. On the left part of your printer, you will now see the exit flag, which looks like a small arm. The exit flag usually hangs straight down.

What are the common problems with the Lexmark prospect pro?

Lexmark Prospect Pro202 Lexmark Prospect Pro205 Lexmark Prospect Pro208 Lexmark Prospect Pro209 Problem Unsupported Printhead; Printhead not supported by all in one; AIO; Printhead Error; An intermittent “Printhead error” message is displayed on the printer; There is a problem with the printhead; Printhead problem; Issue with printhead;

What is a printhead error Lexmark?

A printhead error indicates that the printer thinks a failure has occurred in the printhead unit. Power strips and uninterrupted power supplies can cause a low amperage problem in your printer which can trigger a printhead error, even if the printer has worked on this surge device for months.

How do I fix the alignment on my Lexmark printer?

Click All Programs or Programs, and then select the Lexmark program folder from the list. From the printer folder, click Maintenance > Align Cartridges. Click Print. Follow the instructions on the computer screen.

How do I find my Lexmark firmware version?

How to Check the Firmware Code Level of the Printer

  1. On the printer control panel, press Menu or Settings.
  2. Press Reports.
  3. Press Menu Settings Page to print.
  4. Look for the Device Information section on the print outs.
  5. Look for Base or Engine.

How do I reset my Lexmark printer cartridge?

Navigate to the Maintenance Page Count menu item using the arrow or the Select button. Navigate to the Reset menu option and then press Select. Press the Return button to come out of the diagnostic mode. Now your toner cartridge chip is reset and you can resume a normal printing operation.

How do I clean the printhead on my Lexmark printer?

60 second clip suggested2:29Lexmark How To Clean Printhead -⬇️Link In Description⬇️YouTube

How do I fix alignment on my printer?


  1. Click “Start,” then select “Devices and Printers.”
  2. Right-click on the printer you need to align, then select “Printing Preferences” from the pop-up menu.
  3. Click the “Services” tab, then click the “Align the Print Cartridges” icon.
  4. Follow the instructions from the Alignment wizard to align the cartridges.

How do I calibrate my Lexmark printer?

Press until the check mark on the screen is next to Color Adjust. Press once more. The word Calibrating will appear on the printer display and the printer will begin calibrating the colors. When the calibration is finished, the printer will automatically return to the Ready state.

Where is the ink cartridge on a Lexmark printer?

33 second clip suggested1:36How to Change Ink Cartridges on Lexmark Printers – YouTubeYouTube

Comment nettoyer la tête d’impression d’une imprimante?

Sur le panneau de commande de l’imprimante, appuyez sur , puis sélectionnez More Options (options supplémentaires). Sous Options supplémentaires, repérez et sélectionnez l’option Deep Clean Printhead (nettoyage en profondeur de la tête d’impression). Pour les imprimantes non dotés d’un écran tactile, la procédure à suivre est la suivante :

Comment réparer un problème de qualité d’impression?

Procédure de nettoyage du photoconducteur; Le photoconducteur (aussi appelé kit PC) est la cause la plus probable de ces problèmes de qualité d’impression. Dans la plupart des cas, il faut remplacer le photoconducteur afin de réparer le problème de qualité d’impression.

Pourquoi Lexmark a-t-il une ombre au tableau?

Survient une première ombre au tableau quand, en mai 2011, Lexmark reconnait qu’une série de têtes d’impression présente un défaut de fabrication, dégradant voire rendant impossible les impressions.

Comment nettoyer une tête d’impression en noir et blanc?

Appuyez sur OK. Servez-vous des boutons fléchés pour accéder à l’option Deep Clean Printhead (nettoyage en profondeur de la tête d’impression) et appuyez sur OK. Encre manquante en noir et blanc ou impression médiocre en noir et blanc