How do I reset my Dlink DIR 524?

ByEditor

How do I reset my Dlink DIR 524?

How to Reset the D-Link DI-524 Wireless Router

  1. Press the reset button for 10 seconds. You can use a small object, such as a paper clip to hold down the button.
  2. Open up your Web browser and enter 192.168. 0.1 in the address bar.
  3. For the login, enter admin as the ID and leave the password blank.

What is the default D-Link router password?

The default user name for the D-Link DI-624 wireless router is “admin,” and the Password field should be left blank. The user name and password are both case-sensitive, so be sure to enter the user name in lower case.

How do I setup my DI-524 router?

How to setup WPA-PSK (wireless security) for DI-524?

  1. Step 1 Connect Your PC (Laptop) to the Router (Port 1,2,3,4 either one of them) using a network cable.
  2. Step 2 Launch IE (Internet explorer).
  3. Step 3 Key in your user name and password (User name is Admin with no password by default).

Can I use D Link router as switch?

Re: Turn router into Switch if you want to turn your 4500 into a switch, go into the Basic/Network and disable the DHCP service. Save the settings and reboot if asked. Once it’s done, connect your cables to the LAN ports. Don’t use the WAN port or it won’t work.

How do I configure my Dlink router as a switch?

The Steps

  1. Start with just the router, connect only the power supply.
  2. Reset the router (press and hold the Reset button for 10-15 seconds), because it’s easier when you begin from scratch.
  3. Connect your computer to one of the four LAN ports by a network cable.
  4. Open a web browser, type ‘192.168.

How do I log into my D-Link switch?

Type the switch’s IP address into the address bar of your browser. Log into the switch (the default password is admin). Click OK. The network switch’s default IP address is 10.90.

Can I use a D-Link router as a switch?

How do you set a password on a Dlink router?

How do I change my D-Link Router’s password?

  1. Step 1: Open your Internet browser and enter.
  2. Step 2: Enter the password for your Admin account in the field provided.
  3. Step 3: Locate the Wireless Settings from the drop down menus.
  4. Step 4: In the Password field, specify the new wireless password for the desired wireless band.

What is the password for the D-Link di-524 router?

D-Link discontinued the DI-524 Wireless Router on February 01, 2008, in the U.S. Most D-Link routers don’t need a password by default, and that’s true for the DI-524 router, too. When logging in to your DI-524, just leave the password field blank.

Why is my di-524 default password not working?

The DI-524 Default Password Doesn’t Work! If the blank default password for your DI-524 router isn’t working, it most likely means you’ve changed it since it was first installed (which is good). However, the bad thing about changing the password to anything other than a blank one is that it’s easier to forget it.

What are the different versions of the di-524 router?

The DI-524 router comes in four different hardware versions: A, C, D, and E. Each uses the exact same default password and IP address, and none require a username.

How do I Reset my di-524 router to factory settings?

With something small and sharp, like a paperclip or pin, hold down the button inside the Reset hole for 10 seconds. The reset hole should be on the far right side of the router, next to the power cable. Wait 30 seconds for the DI-524 router to finish resetting, and then unplug the power cable for a few seconds.