How do I setup my TP-Link wireless router?

ByEditor

How do I setup my TP-Link wireless router?

  1. Step 1: install the TP-Link Tether app.
  2. Step 2: connect your router.
  3. Step 3: connect to the Internet with the new router.
  4. Step 4: open the Tether app and log in.
  5. Step 5: adjust router settings.
  6. Step 6: save everything and connect to the Internet.
  7. Step 7: link to your TP-Link Cloud.

Can TP-Link be used wirelessly?

With the bridge mode, we can connect 2 or more wireless routers/ LANs together via wireless, and we can also connect the TP-Link wireless router to wireless access point by using the bridge mode.

How do I enable wireless radio on my TP-Link Router?

How do I configure the basic wireless settings for my TP-Link 11N routers (new logo)?

  1. Log into the router’s web management page:
  2. Select Wireless->Wireless Settings on the left side menu to open the wireless setting page.
  3. Select Wireless->Wireless Security on the left side menu.
  4. Click Save button to save the settings.

What is wireless radio TP-Link?

Enable Wireless Router Radio – The wireless radio of the Router can be enabled or disabled to allow wireless stations access. If enabled, the wireless stations will be able to access the Router, otherwise, wireless stations will not be able to access the Router.

How do I enable wireless radio on my TP-Link router?

How do I enable TP-Link wireless adapter?

Insert the adapter into a USB port on your computer directly. Click or (Network icon) on the task bar, select your Wi-Fi network, and click Connect. Note: In Windows XP, you need to close the TP-LINK Utility before using the Windows Wireless Utility. Select your Wi-Fi network from the utility window and click Connect.

How do I reset my TP-LINK TD w8961n?

With the Router powered on, directly press and hold the reset button on the rear panel with a pin for approximately 6 to 10 seconds, Release the reset button and wait for the device to reboot automatically to its factory default settings.

How can I change my tp-link adsl2 modem WIFI password?

Click Management->Access Control->Password on left page, and type the old password and new password. Click Save/Apply to save the settings. Open your preferred web browser and type in the LAN IP address of your wireless ADSL router in the address bar, and press Enter.