How install Hilti Kwik bolt TZ?

ByEditor

How install Hilti Kwik bolt TZ?

Installation Instructions for the Hilti Kwik Bolt TZ

  1. Drill a hole in the concrete using a hammer drill.
  2. Remove all dust and debris from the hole.
  3. Using a hammer, drive the Kwik Bolt TZ into the hole.
  4. Using a wrench, tighten the nut to the required installation torque for best results.

What is a chemical anchor bolt?

Chemical anchors are a type of anchor bolt that relies on chemical bonding. The method fastens steel studs and bolts into a substrate via chemical and resin means. The substrate most frequently consists of masonry or concrete.

How do you fix a chemical anchor?

How to install the chemical anchor?…If you have any query, please contact us.

  1. DRILLING: Drill correct hole size and depth on concrete/brick/stone/masonry.
  2. HOLE CLEANING: Blow out dust and clean the hole with brush, then blow out remaining dust.
  3. INJECTING: Inject mixed adhesive from the bottom of the hole.

How do I contact Hilti about corrosion resistance?

Use of different grades of steel may affect corrosion resistance. Adhesive Anchoring Systems HIT-HY 150 MAX Adhesive Anchoring System 3.2.6 Hilti, Inc. (US) 1-800-879-8000 | www.us.hilti.comI en español 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www.hilti.caI Anchor Fastening Technical Guide 2011 143

How do I contact Hilti for support with an anchor?

14 Hilti, Inc. (US) 1-800-879-8000 | www.us.hilti.comI en español 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www.hilti.caI Anchor Fastening Technical Guide 2011 The following terminology is generally compliant with that used for Allowable Stress Design of anchors.

What is the size of the Hilti bolts?

Hilti Super HAS threaded rods in 7/8″ diameter size and KWIK Bolt 3 mechanical anchors are zinc coated by the hot-dip galvanizing process. Other sizes may be available through special orders. Stainless steel anchors should be considered as a fastening solution whenever the possibility for corrosion exists.

How do I contact Hilti for support with the 500-sd epoxy?

HIT-RE 500-SD Epoxy Adhesive Anchoring System 3.2.4 Hilti, Inc. (US) 1-800-879-8000 | www.us.hilti.comI en español 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www.hilti.caI Anchor Fastening Technical Guide 2011 95 Bond Strength Design Flowchart