What size hole does a 4 inch hole saw cut?

Product Description. It is a premium construction grade tool that cuts perfect 4” diameter holes. Built tough for repeat use. The bit universally attaches to any 1/2″ drill and has a blade depth of 7/8″ inch.

How is a hole saw measured?

‘Bit Diameter’ is measured in millimetres (mm) and refers to the size of hole saw you are using. ‘Cutting Speed’ is measured in metres per minute (m/min) and can be sourced from the below table for the specific material you are drilling.

What sizes do hole saw bits come in?

Holes saws for use with portable drills are commonly available in diameters from 6 to 130 mm, or in the US, ¼ to 6 inches. The only limit on the length of the cylinder, and thus depth of the hole, is the need to remove the bit from the hole to clear dust.

What are the most common hole saw sizes?

Most common hole sizes are ⅞ inch, 11/8 inches, and 13/8 inches, depending on conduit used. “One topic of interest is accessories for hole saws.

What size hole saw should I use?

Typically, Hole saws are between 14mm to 210mm in diameter. However, if what you need is smaller or bigger than this range, you can easily order for a custom hole saw, made to your specification.

What size hole saws do I need?

Whatever the material, slow is the way to go with hole saws. The larger the diameter of the hole, the slower you’ll need to go. For wood, aluminum, brass and mild steel, 500 rpm is about right for a 3/4-in. hole, all the way down to 75 rpm for a 5-in.

Do I need an arbor for hole saw?

Cutting a hole with a hole saw requires the use of an arbor and often a pilot bit. Arbors, also called mandrels, are designed to connect a hole saw to a drill chuck as well as hold the pilot bit. They are made from hardened steel and alloy steel components for long life, as they need to last through multiple hole saws.

What size hole saw do I need to cut 6pcs?

ArtisanShow 6PCS Diameter 22-65mm Tip Hole Saw Drill Bits Kit Carbide Alloy Hole Saw Set for Cutting Thick Stainless Steel, Sheet Metal, Cast Iron, Copper, Brass, Steel Plate, Fiberglass and FRP. . . . . .

Can you use a hole saw to cut steel?

Lower cutting depths than standard hole saws make these saws less likely to rip or tear while making smooth, burr-free cuts in sheets. All saws are made entirely of heat-treated high-speed steel for cutting aluminum, brass, bronze, and steel. Attach hole saws to a drill or drill press with the included arbors.

What is the difference between hole saws and heat treated teeth?

Lower cutting depths than standard hole saws make these saws less likely to rip or tear while making smooth, burr-free cuts in sheets. Heat-treated high-speed steel teeth cut through aluminum, brass, bronze, and steel.

What kind of Saw do you use to cut aluminum?

All saws are made entirely of heat-treated high-speed steel for cutting aluminum, brass, bronze, and steel. Attach hole saws to a drill or drill press with the included arbors. For technical drawings and 3-D models, click on a part number.