What weight is Stihl chainsaw bar oil?
What viscosity is chainsaw bar oil? The viscosity of chainsaw bar oil can vary depending on the formula but 30W is standard. In cold weather, a thin 10W chainsaw oil may be advantageous, while very hot temperatures may require a much thicker 40W or 50W formula.
What oil should I use in my Stihl chainsaw?
Maintain the performance of your chainsaw by using STIHL Platinum Bar and Chain Oil. Formulated with a special oil base, this product helps prevent sap and pitch from clinging to the bar and chain. Its formulation also provides optimal lubrication and reduces wear.
Can I use 5w30 for chainsaw bar?
Can I Use 5w30 for a Chainsaw Bar? Like 10w30 motor oil, you can use 5w30 oil. However, the thin and low-viscosity SAE5 weight oil will not cling to the chain and chainsaw bar very well in the summer. You may experience a lot of oil loss and a messy worksite if you choose this chainsaw bar oil alternative.
Can you use 30 weight motor oil for a chainsaw bar?
Chain saw bar and chain oil isn’t rated by SAE like traditional automobile motor oil. If your manufacturer’s bar and chain oil is unavailable, you can use SAE 30 weight motor oil to lube your chain during the summer and SAE 10 weight during the winter, according to the University of Missouri Extension.
Can you use transmission fluid for chainsaw bar oil?
On occasion I’ve used tranny fluid to clean out old oil residue in old chainsaws . It works well . In addition to that tranny fluid seems to pump better on some saws with whimpy oilers in cold weather .
Can I use synthetic oil for chainsaw bar oil?
To summarize, yes you can use synthetic motor oils in your chainsaw to lubricate the bar but you shouldn’t want to out of considerations for the environment and yourself.
Is SAE 30 same as 5w30?
Both oils have a “30” hot viscosity rating. This means SAE 5W-30 oil has the same flow rate as SAE 30 at operating temp. So, technically it’s fine to use SAE 5W-30 oil in place of SAE 30.
Can I use 5W 20 for chainsaw bar oil?
In winter use, common multi-grade engine oils work the best as bar oil. Good choices include 0W-20, 5W-20, 0W-30 and 10W-30. The biggest hazard with bar oil in the winter is crystallization: it turns the oil stiff or solid, jamming the oil pump and gluing your chain to the bar.
What is the difference between chainsaw bar oil and motor oil?
Bar and chain oil is stickier than regular motor oil, so it stays on the chain longer. Motor oil flings off the chain more quickly, so if you try Terry’s tip, be prepared to refill the oil on your chain saw more quickly than with regular bar and chain oil.
What is the viscosity of bar and chain oil?
What Is The Viscosity Of Bar and Chain Oil? 1 Winter – 20 weight 2 Summer – 40 to 50 weight 3 All Season – 30 to 40 weight More
Can motor oil be used as bar and chain oil?
Choosing the correct viscosity can be vital to proper protection and operation of your saw. Here are typical bar and chain oil viscosity grades based on a cross-section of products we researched. Can Motor Oil Be Used As Bar And Chain Oil? Can you take a 30-weight motor oil and use it as a bar and chain oil? This is not a good idea.
Why choose the correct viscosity for your saw?
Choosing the correct viscosity can be vital to proper protection and operation of your saw. Here are typical bar and chain oil viscosity grades based on a cross-section of products we researched.
Why is my bar and chain oil so tacky?
The tacky oil clings to the bar and chain links to prevent dry operation. A Different Bar and Chain Oil For Winter And Summer? Should one use a different bar and chain oil viscosity for every season?